FPIT(4) UNIX Programmer's Manual FPIT(4)
fpit - Fujitsu Stylistic input driver
Section "InputDevice"
Identifier "idevname"
Driver "fpit"
Option "Device" "devpath"
...
EndSection
fpit is an XFree86 input driver for Fujitsu Stylistic Tablet
PCs.
The fpit driver functions as a pointer input device, and may
be used as the X server's core pointer.
This driver supports the touchscreen of the Stylistic LT and
(with special options) of the Stylistic 500, 1000 and 2300.
Under Linux the Fujitsus serial port is not, by default,
detected. Therefore the following must be added to one of
your start-up scripts. (Either one of the X scripts, or to
rc.local or similar).
setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 IRQ 15 baud_base 115200
This driver now supports Stylistic 3400 (and possibly other
passive-pen systems) with a special "Passive" paramter. Try
this serial configuration for the 3400:
setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 uart 16450 irq 5
Please refer to XF86Config(5x) for general configuration
details and for options that can be used with all input
drivers. This section only covers configuration details
specific to this driver.
The device supports the following options:
Option "MaximumXPosition" "number"
Sets the maximum X position, use this to
XFree86 Version 4.5.0 1
FPIT(4) UNIX Programmer's Manual FPIT(4)
callibrate your touchscreen's right hand edge.
Option "MinimumXPosition" "number"
Sets the minimum X position, use this to calli-
brate your touchscreen's left hand edge.
Option "MaximumYPosition" "number"
Option "MinimumYPosition" "number"
Same as for X axis, but for Y axis.
Option "InvertX"
Option "InvertY"
Invert the specified axis.
Option "SwapXY"
Swap the X and Y axis.
Option "Rotate" "CW"
Option "Rotate" "CWW" Manipulate the invert and
swap options to match screen rotations.
Option "DeviceName" "name"
Option "DeviceName" "name" sets the name of the
X device.
Option "AlwaysCore" "on"
enables the sharing of the core pointer. When
this feature is enabled, the device will take
control of the core pointer (and thus will emit
core events) and at the same time will be able,
when asked so, to report extended events. You
can use the last available integer feedback to
control this feature. When the value of the
feedback is zero, the feature is disabled. The
feature is enabled for any other value.
Option "DebugLevel" number
sets the level of debugging info reported.
Option "BaudRate" "38400", "19200" or "9600"
changes the serial link speed.
Option "Passive"
decodes the passive pen.
Example, for Stylistic LT setup is:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device" "/dev/ttyS3"
XFree86 Version 4.5.0 2
FPIT(4) UNIX Programmer's Manual FPIT(4)
EndSection
And for other Stylistic devices try:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device" "/dev/ttyS3"
Option "BaudRate" "19200"
Option "MaximumXPosition" "6250"
Option "MaximumYPosition" "4950"
Option "MinimumXPosition" "130"
Option "MinimumYPosition" "0"
Option "InvertY"
EndSection
For Stylistic 3400:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device" "/dev/ttyS3"
Option "BaudRate" "9600"
Option "MaximumXPosition" "4070"
Option "MaximumYPosition" "4020"
Option "MinimumXPosition" "0"
Option "MinimumYPosition" "0"
Option "Passive"
Option "SendCoreEvents"
EndSection
XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).
Original FPIT port: Rob Tsuk <rob@tsuk.com> and John Apfel-
baum <johnapf@linuxslate.com>
X4 Port: Richard Miller-Smith <richard.miller-
smith@philips.com>, based on Elographics code from: Patrick
Lecoanet
X4.2 Cleanup: Alan Cox
XFree86 Version 4.5.0 3
Generated on 2012-01-15 18:49:59 by $MirOS: src/scripts/roff2htm,v 1.70 2011/12/03 18:21:12 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2011 The MirOS Project, Germany.
This product includes material
provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.