WSS(4) BSD Programmer's Manual (i386) WSS(4)
wss - Windows Sound System hardware driver
wss0 at isa? port 0x530 irq 10 drq 0 flags 1 wss* at isapnp? audio* at wss?
The wss driver supports Microsoft's Windows Sound System, MAD16 chip based hardware and their clones. The Windows Sound System is a half- duplex device. The base I/O port is set by a jumper on the board; valid choices are 0x530, 0x604, 0xE80, or 0xF40. Both IRQ and DMA channels are software programmable. The IRQ may be set to 5, 7, 9, 10, or 11, and the DMA chan- nel may be set to 0, 1, or 3. The configuration file must have bit 1 set in flags to enable the MAD16 support. This is to avoid potential conflicts with other devices when probing the MAD16 because it requires use of extra I/O ports not in the base port range. Bit 2 in flags disables the joystick port on MAD16 hardware.
audio(4), intro(4), isa(4), isapnp(4)
The FM synthesizer is not supported. MirOS BSD #10-current November 8, 1995 1
Generated on 2014-02-10 02:47:05 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.